Film black 1,35x14m / Velvet roll

Velvet roll film black 1,35x14m
 

NOTE! When buying this product you will receive one roll of 1,35x14m.

Do you feel like personalizing the interior of your car? Or maybe not only the interior? 
And not only the car?

Do you have a scratched windowsill or a dinged piece of furniture?

We have the solution to your problems.

Our thermoplastic veneer film AKSAMIT BLACK is a decorative product. It will allow you to give your objects freshness - awaken them to life! It will perfectly help to stand out of the crowd and break out of the accepted schemes. Our veneer film is an ideal material for inexpensive masking of damage and other imperfections.

AKSAMITNA film will be perfect for both tuning your car and giving your furniture and the interior of your home a unique style. It is soft and nice to the touch. Velvet finish will allow you to mask any imperfections, hiding scratches, scratches and discoloration. The wrapped object will acquire a unique look, giving the interior a peculiar atmosphere.

1. properties of the film:
 

self-adhesive - the film has a specialized channel adhesive, which facilitates sticking and minimizes the risk of air bubbles; the film is easy to install especially on flat, even surfaces

easy to correct - you may be thinking, "What if I stick the film wrong?" Relax! Even within a dozen minutes after the first fixation you are able to get the full strength of the film. At the initial stage, the adhesive still weakly "binds", which will make it easier for you to correct your mistake

trouble-free to remove - you can easily remove the film with warm air; it does not leave traces of glue

flexible and thermoplastic - you can fit the film into a wide variety of shapes. You just need to use heat, which will increase its plasticity

convenient for portioning - the film on its inner side has evenly spaced lines, which will make it easier for you to cut it to the right size

resistant resistant to abrasion, detergents and even oil and grease

easy to clean - just wipe with a damp cloth.

2 Installation instructions

Tools useful for film installation: surface degreaser, scissors, hair dryer and squeegee. (no items included)

NOTE! If you want to use a heat gun, remember to keep the proper distance. The same is true for a hair dryer. Too high a temperature can unstick the veneer.

1) Preparation of the film - the film on its inner side has evenly spaced lines. Based on these, cut the appropriate piece with scissors. NOTE: It would be worthwhile for you to include 2-3 cm each for wrapping the foil under the element to be taped.

2) Preparation of the surface - the area where the film will be located degrease and wipe well. It must be clean and dry.

3) Installation of the film - stick the film gradually peeling off the protective paper. For flat surfaces, press down using a squeegee. However, when you come across rounded shapes, unevenness heat the film using, for example, a hair dryer. The film will become malleable and, with a little patience and precision, will allow it to conform to the surface to be wrapped.

4) Elimination of bub bles - channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the film from the inside out - you can do this with a squeegee.

5) After installation, the film does not require heat fixation.

3) Use of the film 

The film is primarily recommended for use inside. It can also be used outdoors.

The most common uses of the film:

visual tuning of the car

refreshing the appearance of a laptop, windowsill, phone, bicycle

masking of damage caused and other imperfections

Attention! There are places, objects to which it is not worth sticking the film:

do not stick to moving parts - such as door hinges - because the film may break off

do not stick to places that heat up - for example, exhaust pipes, lamps, oven doors - because the film may burn

4 Specification

Foil type - ACSAMITE

Color: Black

Thickness - 280 microns

Roll dimensions - 1,35x14m

Channel adhesive: yes

External: yes

Thermoplastic: yes

Waterproof: no

Application temperature - from -40°Cto +80°C

NOTE! When you buy this product, you will receive one roll of 1.35x14m.