Carbon 3D roll film black 1,27x28m

ROLL FILM CARBON 3D BLACK 1,27X28M

NOTE! Buying this product you will receive one roll of 1,27x28m.

Do you feel like personalizing the interior of your car? Or maybe not only the interior? 
And not only the car?

Do you have a scratched windowsill or a dinged furniture?

We have the solution to your problems.

Our thermoplastic veneer film CARBON 3D BLACK is a decorative product. It will allow you to give your objects a fresh look - awaken them to life! It will perfectly help to stand out of the crowd and break out of the accepted schemes. Our veneer film is an ideal material for inexpensive masking of damage and other imperfections.

CARBON film is an increasingly popular material used for visual tuning of cars. It is used both inside cars and on the outside. It looks like real carbon fiber - a durable material with low weight. It will give the car an indestructible image while maintaining its lightness.

CARBON veneer film will also be great for wrapping: motorcycles, laptops, phones, tablets... or bicycles and scooters. In fact, only your imagination limits the use of the film.

1. properties of the film:

self-adhesive - the film has a specialized channel adhesive, which makes it easy to stick and minimizes the risk of air bubbles; the film is easy to install especially on flat, even surfaces

easy to correct - you may be thinking, "What if I stick the film wrong?" Relax! Even within a dozen minutes after the first fixation you are able to get the full strength of the film. At the initial stage, the adhesive still weakly "binds", which will make it easier for you to correct your mistake

trouble-free to remove - you can easily remove the film with warm air; it does not leave traces of glue

flexible and thermoplastic - you can fit the film into a wide variety of shapes. You just need to use heat, which will increase its plasticity

convenient for portioning - the film on its inner side has evenly spaced lines, which will make it easier for you to cut it to the right size

resistant resistant to abrasion, detergents and even oil and grease

easy to clean - just wipe with a damp cloth

has a structure that looks like real carbon fiber.

2. Installation instructions

Tools useful for film installation: surface degreaser, scissors, hair dryer and squeegee. (no items included)

NOTE! If you want to use a heat gun, remember to keep the proper distance. The same is true for a hair dryer. Too high a temperature can unstick the veneer.

1) Preparation of the film - the film on its inner side has evenly spaced lines. Based on these, cut the appropriate piece with scissors. NOTE: It would be worthwhile for you to include 2-3 cm each for wrapping the foil under the element to be taped.

2) Preparation of the surface - the area where the foil will be placed well degrease and wipe. It must be clean and dry.

3) Installation of the film - stick the film gradually peeling off the protective paper. For flat surfaces, press down using a squeegee. However, when you come across rounded shapes, unevenness heat the film using, for example, a hair dryer. The film will become malleable and, with a little patience and precision, will allow it to conform to the surface to be wrapped.

4) Elimination of bub bles - channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the film from the inside out - you can do this with a squeegee.

5) After installation, the film does not require heat fixation.

3) Use of the film

The film is primarily recommended for use inside. It can also be used outdoors.

The most common uses of the film:

visual tuning of the car

refreshing the appearance of a laptop, windowsill, phone, bicycle

masking of damage caused and other imperfections

Attention! There are places, objects to which it is not worth sticking the film:

do not stick to moving parts - such as door hinges - because the film may break off

do not stick to places that heat up - such as exhaust pipes, lamps, oven doors - because the film may burn

4 Specification

Film type - CARBON

Color: Black

Thickness - 105 microns

Roll dimensions- 1.27x28m

Channel adhesive: yes

External: yes

Thermoplastic: yes

Waterproof: yes

Application temperature - from -40°Cto +80°C

NOTE! When you buy this product, you will receive one roll of 1.27x28m.